Universal Speedball Monitor Arm (3 Inch) is an articulating arm with combination 1/4-20 and 3/8-16 mounting screws on each end, two double-ball clamps, and one 3 inch (75mm) extension with velcro cable wrap. Each ball end contains both mounting thread standards. Push the 3/8-16 outer screw down to reveal the hidden 1/4-20. Install the ball with the cam-lever in the down position to finger-tight, then lift the lever to add extra locking force to the assembly. The extra force of the cam-lever design allows the arm to lock in place without the use of messy rubber pads. The "Chip Clip" clamp design allows for easy, annoyance-free installation, and the ratcheting thumbscrew can be pulled out and repositioned. 3 inch arm has pass-through holes for 1/4-20 and 3/8-16 screws. Universal Speedball components are compatible with any other brand of 1 inch (25mm) ball attachment like Ultralight Control Systems, Wooden Camera, etc.
Universal Speedball Monitor Arm (3 Inch) is an articulating arm with combination 1/4-20 and 3/8-16 mounting screws on each end, two double-ball clamps, and one 3 inch (75mm) extension with velcro cable wrap.
Each ball end contains both mounting thread standards. Push the 3/8-16 outer screw down to reveal the hidden 1/4-20.
Install the ball with the cam-lever in the down position to finger-tight, then lift the lever to add extra locking force to the assembly. The extra force of the cam-lever design allows the arm to lock in place without the use of messy rubber pads.
The Chip Clip clamp design allows for easy, annoyance-free installation, and the ratcheting thumbscrew can be pulled out and repositioned.
3 inch arm has pass-through holes for 1/4-20 and 3/8-16 screws.
Universal Speedball components are compatible with any other brand of 1 inch (25mm) ball attachment like Ultralight Control Systems, Wooden Camera, etc.
Product Weight: 11.10oz (314g)Product Dimensions (WxLxH): 2.50 x 1.00 x 10.75in (63 x 25 x 273mm)
MID49 Universal Speedball Monitor Arm (3 Inch) Review - Newsshooter
Universal Ultra Arm v2 (Combo 1/4-20 & 3/8-16) — Wooden Camera
Ergotron HX Triple Monitor Arm
Ergotron HX Triple Monitor Arm
MID49 Universal Speedball Monitor Arm (3 Inch) Review - Newsshooter
MOUNT PRO Triple Monitor Mount, 3 Monitor Desk Arm fits Three Max 27 LCD Computer Screens, up to 17.6lbs Each, Premium Gas Spring Monitor Stand with Tilt Swivel Rotation, Vesa Mount
Buy - MID49 M49-SPD-ARM-9 (M49SPDARM9) Universal Speedball Monitor Arm 9 in
Buy - MID49 M49-SPD-ARM-3 (M49SPDARM3) Universal Speedball Monitor Arm 3 in
MOUNT PRO Triple Monitor Mount, 3 Monitor Desk Mount for There Screens up to 32 Inch, Full Motion Gas Spring Triple Monitor Stand, Heavy Duty Monitor Arm Hold up to 17.6lbs
MOUNT PRO Triple Monitor Mount, 3 Monitor Desk Arm fits Three Max 27 LCD Computer Screens, up to 17.6lbs Each, Premium Gas Spring Monitor Stand with Tilt Swivel Rotation, Vesa Mount
is an articulating arm with universal 1/4-20 and 3/8-16 interchangeable knobs with non-slip rubber pads on each end and a center double ball
Universal Ultra Arm v2 (Combo 1/4-20 & 3/8-16)
MOUNT PRO Triple Monitor Desk Mount - Articulating Gas Spring Monitor Arm, Removable with Clamp and Grommet Base - Fits 13 to 27 Inch LCD Computer Monitors, VESA 75x75, 100x100 : Electronics
Universal Speedball Monitor Arm (3 Inch) is an articulating arm with combination 1/4-20 and 3/8-16 mounting screws on each end, two double-ball clamps, and one 3 inch (75mm) extension with velcro cable wrap. Each ball end contains both mounting thread standards. Push the 3/8-16 outer screw down to reveal the hidden 1/4-20. Install the ball with the cam-lever in the down position to finger-tight, then lift the lever to add extra locking force to the assembly.
Universal Speedball Monitor Arm (3 inch) by MID49
Buy - MID49 M49-SPD-ARM-6 (M49SPDARM6) Universal Speedball Monitor Arm 6 in