RAM Mounts Swing Arm Mount

The RAM-109-1A is a Straight 6 long Swing Arm Extension for the RAM 109 series. This arm includes a 4.5 long bolt, washers and tightening knob. If you already have one of the RAM-109 series mounts with a single rigid swing arm, you can add this arm between the base and the existing swing arm, extending it by 6 inches, and adding a second or third pivoting point.

Ram 6 Straight Swing Arm Extension - RAM-109-1ASU

The RAM-VP-SW1-8 consists of a 8 upper male Tele-Pole, double swing arm and 2.5 round base that contains the universal AMPs hole pattern. The Tele-Pole can be easily adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole becomes a rigid support for connecting devices or cradles. The Tele-Pole will connect to any RAM vehicle base with a welded female Tele-Pole.

RAM-VP-SW1-89 Ram Mount Double Swing Arm 8 male 9 Female Tube

Ram Mount Vertical Double 6 Swing Arms W/6.25 X 2 Rectangle Base & Vertical Mounting Base

The RAM-109-1AU is a bent 6 long Arm extension for the RAM 109 series. This arm includes a 4 long bolt, washers and tightening knob.

RAM® 6 Curved Extension Swing Arm for Horizontal/Vertical Mounts

National Products - RAM Mounts - Curved Double Swing Arm with Swivel Socket Mount - RAM-VB-110-6U - Tessco

The RAM single swing and socket arm mount includes a 6 STRAIGHT swing arm mounted on a horizontal surface mounting base. At the end of the mount is a rectangular 6.25 x 2 top base. The pivoting point of the rectangle base allows 180 degree rotation, the swing arm allows a 360 degree rotation.

Ram Mount Horizontal Single Arm Ball Mount - Gimbal Bracket

RAM MOUNTS RAM No-Drill Mount for Select Trucks RAM-VB-203-SW2

The RAM single swing arm mount consists of a 6 long BENT swing arm mounted on a horizontal surface mounting base. At the device mounting end of the mount is a rectangular 6.25 x 2 plate. There are two (2) pivoting points on the mount. One at the swing arm and base and one at the center of the rectangular plate and the end of the swing arm. Each pivoting point allows a complete 360 degree rotation.

National Products LTD RAM-109H Horizontal Single Swing-Arm Mount

The RAM single swing arm mount consists of a 6 long BENT swing arm mounted on a horizontal surface mounting base. At the device mounting end of the mount is a rectangular 6.25 x 2 plate. There are two (2) pivoting points on the mount. One at the swing arm and base and one at the center of the rectangular plate and the end of the swing arm. Each pivoting point allows a complete 360 degree rotation.

Ram, Single Swing Arm Mount Horizontal

The RAM single swing arm mount consists of a 6 long BENT swing arm mounted on a horizontal surface mounting base. At the device mounting end of the mount is a rectangular 6.25 x 2 plate. There are two (2) pivoting points on the mount. One at the swing arm and base and one at the center of the rectangular plate and the end of the swing arm. Each pivoting point allows a complete 360 degree rotation.

Ram, Single Swing Arm Mount Horizontal

The RAM single swing arm mount consists of a 6 long BENT swing arm mounted on a horizontal surface mounting base. At the device mounting end of the mount is a rectangular 6.25 x 2 plate. There are two (2) pivoting points on the mount. One at the swing arm and base and one at the center of the rectangular plate and the end of the swing arm. Each pivoting point allows a complete 360 degree rotation.

Ram, Single Swing Arm Mount Horizontal