RAM Mounts Pro 360 H Live Pole Mount - Horizontal Base - H stands for horizontal for mounting on a horizontal surface screwed on or in a rail. RAM Mount
A gigantic assortment, the fastest deliveries and the right prices. Order everything you need for fishing, from rods, reels, lures to belly boats and fly fishing - We have everything you could need.
- 106cm long, reaches max 106cm more from the railing.- 1 ball joint provides stability, while perfectly vertically aligned- Made in USA - designed in Sweden- Complete kit for live sensors with 360 degree stepless rotation.- Freely adjustable height. Fast adjustment with quick release clamps.- Rod can be split for shorter overall length.- Can adjust inertia for rotation and quickly lock in selected position.- When the live transducer is mounted above, the rubber ball protects the transducer from grounding and handling on land.- RAM's unique versatility makes the mount adaptable for future needs or adaptation to another boat or kayak.- With RAM's famous ball joints, you get stability and unique adjustability, so you can adjust it in any direction, front to back, out and in, for perfect vertical placement.- Powder-coated marine aluminum and RAM's uniquely stable ball joint.- Swivel arm so you can fold up and mount it inside the rail when traveling.- Tested up to 4 knots. Stable if properly mounted on the ground.- When folded for transportation, it can be launched with extra RAM support in rough seas, like a trolling motor.- For extra stability when searching for fish over large areas and at higher speeds, it can be fitted with extra RAM support e.g. RAP-400-201 (Trolling motor mount that you may already have).- Handle that can be extended if necessary. 14 (36cm) RAP-BB-230-14 or 18 (46cm) RAP-BB-230-18.- If you want to attach to the rail, you can use RAM-HAR-xxx together with RAM-B-337U. Then you also get B-balls for mobile and cup holders. Otherwise carriage bolt.
RAM® Horizontal 12 Swing Arm Mount for Fishfinders & Plotters – RAM Mounts
Fishfinder + Transducer Mounts – BassFishin Electronics, LLC
Summit Boat Mount Kit – Summit Fishing Equipment
The RAM single swing arm mount consists of a 6 long BENT swing arm mounted on a horizontal surface mounting base. At the device mounting end of the mount is a rectangular 6.25 x 2 plate. There are two (2) pivoting points on the mount. One at the swing arm and base and one at the center of the rectangular plate and the end of the swing arm. Each pivoting point allows a complete 360 degree rotation.
Ram, Single Swing Arm Mount Horizontal
Capture the best footage while out on the water with the RAM Tough-Pole action camera mount. Compatible with any RAM spline post base, this kit consists of a bottom post and two 18 PVC Pipes connected by a ratchet adapter. The top of the pipe adapts to a double ball mount that will connect to any action camera, replacing the factory GoPro hinge adapter.
Ram Mounts - Tough-Pole Action Camera System with Double Pipe for Any Post/Spline Base - RAP-B-202-GOP1-A-420-424-18U
RAM Mounts Pro 360 H Live Pole Mount - Horizontal Base
RAM Mounts No-Drill Laptop Mount for '12-23 RAM 2500-5500 + More RAM-VB-178A-SW1 : Electronics
Get the perfect shot from your action camera when you’re out on the water with this Adjustable Track Mount kit. The kit includes two 18” Extension Poles (overall mount length 48), making it an ideal solution for the rear of your kayak, while the Ratchet Attachment provides your action camera with various adjustment angles. Without adjusting any knobs, the 360 degree swivel feature allows you to quickly change camera angles as you reel in your catch of the day.
Ram Tough-Pole 48 Action Camera Mount with Double Pipe & Track Base
RAM® Tough-Pole™ 36 Action Camera System with Spline Post – RAM Mounts
The RAM Track-Node is a ratcheting, highly adjustable track base designed to accommodate both fishing rod holders and the RAM Tough-Pole action camera mount. To allow for side-to-side movement on the track, a friction washer is included so the RAM Track-Node base can pivoted with little force. With a quick twist of the knob, easily swing the RAM Tough-Pole in and out of your vessel.
Ram Tough-Pole Camera Mount with Double Pipe & Dual Track Base - RAP-411-18-18-A-GOP1
The ProDucer Transducer Pole System Deluxe Mid Ram Mount Arm
Ram Mounts X-Grip Phone Mount with Handlebar U-Bolt Base (RAM-B-149Z-A-UN7U)
The RAM Tele-Pole 12 tall female tube base has a square plate base that will connect to many of the RAM-VB No-Drill and Drill plate bases, as well as RAM-VP-TTMXX and RAM-VP-TTMFXX top tele-poles. The female post is 12 tall and has a 1.375 diameter.
RAM-VP-TBF12U Ram Mount 12 Long Lower Female Tele-Pole
The RAM Track-Node is a ratcheting, highly adjustable track base designed to accommodate both fishing rod holders and the RAM Tough-Pole action camera mount. To allow for side-to-side movement on the track, a friction washer is included so the RAM Track-Node base can pivoted with little force. With a quick twist of the knob, easily swing the RAM Tough-Pole in and out of your vessel.
Ram Tough-Pole Camera Mount with Double Pipe & Dual Track Base - RAP-411-18-18-A-GOP1